Thermal Image Scope User Manual
22
Chapter 8 Client Software Connection
Connect the device to the T-Vision APP via hot spot, then you can capture picture, record video, or
configure parameters on your phone.
Steps
1. Hold to show the menu of device.
2. Press to enable hot spot function.
3. Turn on the WLAN of your phone and connect to the hot spot.
● Hot Spot Name: HIK-IPTS Serial No.
● Hot Spot Password: the last 9 digits of serial No.
4. Search the T-Vision on App Store (iOS System) or Google Play™ (Android System) to download it,
or scan the QR code to download and install the app.
5. Open the APP and connect your phone with the device. You can view the interface of device on
your phone.
Note
The hot spot function will be turned off automatically when power is less than 15%.
To Next Page
Loading...
Need help?
General
