User Manual of DS-7200/7300/8100-SH Series DVR
23
Figure 1.10 Rear Panel of DS-7316HFI-SH and DS-7316HWI-SH
Note: The rear panel of DS-7304HFI-SH/DS-7304HWI-SH provides 4 video input interfaces, and the rear
panel of DS-7308HFI-SH/DS-7308HWI-SH provides 8 video input interfaces.
Table 1.9 Description of Rear Panel
BNC connector for analog video input.
BNC connector for video output.
BNC connector for spot video output.
Connects USB mouse or USB flash memory devices.
Connector for RS-232 devices.
DB15 connector for VGA output. Display local video output and menu.
RCA connector for audio input.
RCA connector for audio output.
RJ45 10M/100M/1000M Ethernet interface.
Connector for RS-485 devices. Connect the D+ and D- terminals to R+ and
R- terminals of PTZ receiver respectively.
Connector for alarm input/output.
Connects external SATA HDD, DVD-R/W.
Switch for turning on/off the device.
Ground (needs to be connected when DVR starts up)
DS-7332HFI-SH, DS-7332HWI-SH and DS-7332HI-SH:
The rear panel of DS-7332HFI-SH, DS-7332HWI-SH and DS-7332HI-SH DVR is shown in Figure 1.11.
Figure 1.11 Rear Panel of DS-7332HFI-SH, DS-7332HWI-SH and DS-7332HI-SH
Note: DS-7324HFI-SH, DS-7324HWI-SH and DS-7324HI-SH models provide 24 video input interfaces on
the rear panel.