-
Tap Shortcut, and enter the serial number in the numeric panel, and tap .
-
Tap List, and select a camera to display.
You can also perform the following operaons:
• Enter 0+ to stop playing the live video of corresponding camera on the window.
• Tap
to preview the live video of the previous input camera channel on the selected output
monitor.
• Tap
to preview the live video of the next input camera channel on the selected output
monitor.
6.
Other operaons:
• Tap and use the smart scaling funcon to select and zoom in the desired wall area. For
details about the
operaon, see Smart Scaling on Video Wall.
• Tap to perform PTZ control. For details, see PTZ Control for specicaons.
5.1.3 Local Live View
Steps
1. Tap
and select Live View to go to the local live view.
Figure 5-4 Live View
2. Oponal: Tap to select the window division mode.
Note
You can also preview the window rst and then split the window. In this situaon, the
previewed window in on the upper-le by default.
3. Select a channel, and tap .
4. Watch the live view.
-
Tap Shortcut, and enter the serial number in the numeric panel, and tap .
DS-1600KI Keyboard Quick Start Guide
27