Day/Night High-definition Dome Camera·User Manual
Figure 2-19 Securing Lower Dome
The DS-1229ZJ and DS-1239ZJ mounts are shown as follows:
2.3 Image and Focus Adjusting
Steps:
1. Three-axis adjustment.
1). View the camera image using the monitor.
2). Rotate the panning table to adjust the panning position of
the camera.
3). Loosen the tilting lock screw.
4). Rotate the tilting table to adjust the tilting position of the
camera.
5). Tighten the tilting lock screw.
6). Rotate the lens to adjust the azimuth angle of the image.
To Next Page
Loading...
Need help?
General
