3. Press the menu button to enter the menu and you can see the
SYNC mode is switched from INT to LINELOCK or vice versa.
Note: For line lock synchronization, you can adjust the V Phase
value to adjust the power synchronous phase.
4.14 Language Settings
You can choose the language of the menu. The factory default
language is English.
Steps:
1. Move the cursor to LANGUAGE.
2. Switch the menu button left/right to select the language you
prefer.
4.15 Camera Reset Settings
Move the cursor to CAMERA RESET, press the menu button to
reset all camera settings to factory default parameters.
4.16 Pixel Correct Settings
Purpose:
The CCD sensor of the lens may appear defective pixels. You can
trigger the pixel correction function to correct and compensate the
defective pixels.
Steps:
To Next Page
Loading...
Need help?
General
