2 Installation
Before you start:
Read the following contents carefully before the installation.
Make sure that all the related equipment is power-off during
the installation.
Check the specification of the products for the installation
environment.
Check whether the power supply is matched w ith your AC
outlet to avoid damage.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
Ceiling mounting is recommended, we will take ceiling mounting
as an example to explain the installation steps in this chapter.
2.1 Ceiling Mounting
Notes:
1. When mounting the camera, for the cement wall, you need to
mount the base with expansion screws. For the wooden wall,
you need to mount the base with self-tapping screws.
2. Please ensure that the wall is strong enough to withstand more
than 3 times the weight of the camera and the bracket. If the
wall is not strong enough, the camera may fall and cause
serious damage.
To Next Page
Loading...
Need help?
General
