EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2DE2A404IW-DE3

HIKVISION DS-2DE2A404IW-DE3 User Manual

HIKVISION DS-2DE2A404IW-DE3
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
User Manual of Network PTZ Camera
© Hikvision
64
5. Set the tracking duration. The speed dome stops tracking when the duration time is up. The
duration ranges from 0 to 300 seconds.
Setting the duration to 0 means that there no duration when speed dome tracks.
This function varies depending on different camera models.
6. Click to clear the settings.
5.4.9 Prioritize PTZ
Steps:
1. Enter the Prioritize PTZ interface:
Configuration > PTZ > Prioritize PTZ.
Figure 5-36 Position Settings
2. Select Network or RS-485 from the dropdown list
3. Set the delay time (Range 2-200s).
4. Click to save the settings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2DE2A404IW-DE3 and is the answer not in the manual?

HIKVISION DS-2DE2A404IW-DE3 Specifications

General IconGeneral
Card reader integratedYes
Compatible memory cardsMicroSD (TransFlash), SDHC, SDXC
Maximum memory card size256 GB
Maximum resolution2560 x 1440 pixels
Video compression formatsH.264, H.264+, H.265, H.265+
TypeIP security camera
Placement supportedOutdoor
Sensor typeCMOS
Optical sensor size1/3 \
Housing materialAluminum
Voice codecsG.711, G.722.1, G.726, MP2L2, PCM
Number of users32 user(s)
Supported network protocolsIPv4/IPv6, HTTP, HTTPS, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, DHCP, PPPoE, Bonjour
Minimum illumination0 lx

Related product manuals