HIKVISION DS-2DE2A404IW-DE3 User Manual

User Manual of Network PTZ Camera
© Hikvision
89
Figure 6-35 Defog Mode
 EIS (Electronic Image Stabilization)
You can set theEIS to ON or OFF as you need.
Figure 6-36 Electronic Image Stabilization
Video Adjustment
The functions vary depending on different camera models.
 Mirror
If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror.
The flip direction can be set to OFF or CENTER.
 Video Standard
You can set the Video Standard to 50 Hz (PAL) or 60 Hz (NTSC) according to the video system in
your country.
 Capture Mode
You can disable this function or select the capture mode from the list.
Other
The functions vary depending on different camera models.
 Lens Initialization
The lens operates the movements for initialization when you enable Lens Initialization.
 Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can be selected
from the list.
6.3.2 Configuring OSD Settings
Purpose:
The camera supports following on screen displays:
Time: Supports for time display.
Camera Name: Identifies the name of camera.
You can customize the on screen display of time.
Steps:
1. Enter the OSD settings interface:

HIKVISION DS-2DE2A404IW-DE3 Specifications

General

Card reader integrated	Yes
Compatible memory cards	MicroSD (TransFlash), SDHC, SDXC
Maximum memory card size	256 GB
Maximum resolution	2560 x 1440 pixels
Video compression formats	H.264, H.264+, H.265, H.265+
Type	IP security camera
Placement supported	Outdoor
Sensor type	CMOS
Optical sensor size	1/3 \
Housing material	Aluminum
Voice codecs	G.711, G.722.1, G.726, MP2L2, PCM
Number of users	32 user(s)
Supported network protocols	IPv4/IPv6, HTTP, HTTPS, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, DHCP, PPPoE, Bonjour
Minimum illumination	0 lx