Note
See Set Camera Info to set Device No. and Camera Info.
FTP Picture Name
Default and Custom are available. When Custom is selected, you can choose the informaon to
form the picture
le name.
3.3.3 Advanced Parameters
The version of license plate recognion algorithm is shown.
3.3.4 Set Armed License Plates
You can specify the vehicles you want to arm by adding their license plates to the blocklist or
allowlist.
Steps
1.
Go to Open
Plaorm → Road Trac → Blocklist & Allowlist .
2.
Click Export to export license plate list template.
Note
If a list of license plates exists, the exisng list is exported.
3.
Fill in the list.
4.
Click Browse to import the list.
The list shows on the web page.
5.
Select a mode according to your need.
Normal Mode
No vehicle is armed.
Allowlist Mode Vehicles NOT on the list are armed.
Blocklist Mode Only the vehicles on the list are armed.
6.
Click Save.
3.4 Face Capture
Face capture
funcon detects faces and captures pictures. When the grading of the detected face
exceeds an algorithm-dened value, the device captures the face and triggers linkage acons. Set
up rule and parameters before using the
funcon.
Network Speed Dome User Manual
11