Network Video Recorder User Manual
21
5. Optional: Enable Stream Encryption. It requires to enter verification code in remote access and
live view after this function is enabled.
6. Optional: Edit Server IP.
7. Optional: Enable Sub-Stream Self-Adaptive Bitrate. When the network environment is poor, the
device would automatically adjust video bitrate to ensure playing fluency.
8. Bind your device with a Hik-Connect account.
1) Use a smart phone to scan the QR code, and download Hik-Connect app. You can also
download it from https://appstore.hikvision.com, or the QR code below. Refer to Hik-
Connect Mobile Client User Manual for details.
Figure 5-5 Download Hik-Connect
2) Use Hik-Connect to scan the device QR, and bind the device.
Note
● If the device is already bound with an account, you can click Unbind to unbind with the
current account.
● You can also use the QR code in at the upper-left corner to download Hik-Connect and
bind your device.
9. Click Apply.
Result
● If your device is connected with Hik-Connect platform, Connection Status will be Online.
● If your device is bound with a Hik-Connect account, Bind Status will be Yes.
What to do next
You can access your video recorder via Hik-Connect.
5.2.3 Email
Set an email account to receive event notification.
Before You Start
● Ensure SMTP service is available for your email.
● Configure your network parameters. Refer to General for details.
To Next Page
Loading...
Need help?
General
