Network Video Recorder User Manual
67
Figure 6-28 Face Picture Comparison
2. Select a camera.
3. Turn on Enable.
4. Select the face picture library (or libraries) in List Library Linkage.
5. Set the face picture library similarity.
Similarity
Similarity value ranges from 0 to 100. Device will analyze the similarity between the detected
face picture and face pictures in the library. When the similarity reaches the threshold value,
the face picture comparison succeeded, and the face picture is recognized.
6. Set the arming schedule. Refer to Configure Arming Schedule for details.
7. Set the linkage actions for Linkage Succeeded and Linkage Failed. Refer to Configure Alarm
Linkage Action for details.
Linkage Succeeded
The device will perform linkage actions when the face picture comparison succeeded.
Linkage Failed
The device will perform linkage actions when the face picture comparison failed.
8. Click Apply.
6.4.4 Other Events
Thermal Camera Detection
The device supports the event detection modes of thermal network cameras: fire detection,
temperature detection, etc. You can configure the arming schedule and linkage actions of the
selected event.
Before You Start
Add a thermal network camera to your device and make sure the camera is activated.
To Next Page
Loading...
Need help?
General
