Network Video Recorder User Manual
46
Device ID
The Device ID shall be provided by the platform.
Version
ISUP protocol version, only V5.0 is available.
Encryption Password
Encryption password is required when using ISUP V5.0 version, it provides more secure
communication between the device and platform. Enter it for verification after the device is
registered to the ISUP platform.
5. Click Apply to save the settings and restart the device.
What to do next
You can see the online status (online or offline) after the device is restarted.
6.2.7 Hik-Connect
Go to Configuration → Network → Platform Access. Refer to Hik-Connect for details.
6.2.8 Email
Go to Configuration → Network → Email. Refer to Email for details.
6.3 Camera Management
6.3.1 Network Camera
Add Automatically Searched Online Network Camera
Add the network cameras to your video recorder.
Before You Start
● Ensure your network camera is on the same network segment with your video recorder.
● Ensure the network connection is valid and correct.
● Ensure the network camera password is the same as your video recorder.
Steps
1. Go to Configuration → Camera → Camera → IP Channel.
2. Click Online Device List. The online cameras on the same network segment will be displayed in
the list.
To Next Page
Loading...
Need help?
General
