Network Video Recorder User Manual
77
6.5.4 Configure Storage Mode
Configure HDD Quota
Each camera can be configured with an allocated quota for storing videos.
Steps
Note
This function is only available for certain models.
1. Go to Configuration → Record → Storage Mode.
2. Set Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in Record Capacity.
Figure 6-34 Quota
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to activate the new settings.
6.5.5 Advanced Settings
Steps
1. Go to Configuration → Record → Advanced.
2. Configure the parameters as your desire.
Overwrite
To Next Page
Loading...
Need help?
General
