EasyManuals Logo
Home>HIKVISION>Network Hardware>DS-7608NI-I2/8P

HIKVISION DS-7608NI-I2/8P User Manual

HIKVISION DS-7608NI-I2/8P
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Network Video Recorder User Manual
66
2.3.4 Editing IP Cameras Connected to the PoE Interfaces
This chapter is only applicable for the following models: DS-7600NI-I2/P, DS-7700NI-I4/P,
DS-7600NI-K2/P, DS-7700NI-K4/P and DS-7600NI-K1/4P series NVR.
The PoE interfaces enables the NVR system to pass electrical power safely, along with data, on
Ethernet cabling to the connected network cameras.
Up to 4 network cameras can be connected to /4P models, 8 network cameras to /8 P models, and
16 network cameras to /16P models. If you disable the PoE interface, you can also connect to the
online network cameras. And the PoE interface supports the Plug-and-Play function.
Example:
For DS-7608NI-I2/8P, if you want to connect 6 network cameras via PoE interfaces and 2 online
cameras, you must disable 2 PoE interfaces in the Edit IP Camera menu.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Step 1 Enter the Camera Management interface.
Menu> Camera> IP Camera
Figure 2-40 List of Connected Cameras
The cameras connecting to the PoE interface cannot be deleted in this menu.
Step 2 Click the button, and select the Adding Method in the drop-down list.
Plug-and-Play: It means that the camera is connected to the PoE interface, so in this case,
the parameters of the camera can’t be edited. The IP address of the camera can only be

Table of Contents

Other manuals for HIKVISION DS-7608NI-I2/8P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NI-I2/8P and is the answer not in the manual?

HIKVISION DS-7608NI-I2/8P Specifications

General IconGeneral
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget120 W
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity1
Ethernet LAN data rates10, 100, 1000 Mbit/s
Power over Ethernet (PoE)Yes
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity8
Number of fans1 fan(s)
Input bandwidth80 Mbit/s
Number of users64 user(s)
Output bandwidth256 Mbit/s
Maximum resolution3840 x 2160 pixels
Alarm input channels4
Video input channels8 channels
Video formats supportedH.264, H.264+, H.265, H.265+, MPEG4
Still image resolution(s)3840 x 2160, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768
Analog signal format systemNTSC, PAL
Resolution at capture speed1920x1080@60fps
HDD capacity0 GB
HDD interfaceSerial ATA
Maximum storage capacity12 TB
Number of HDDs installed0
Number of HDDs supported2
CertificationFCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032:2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4
Product colorBlack, Silver
Rack capacity1U
Wi-FiNo
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals