Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1.
Go to Conguraon → Record → Storage .
2.
Click Add.
3.
Set NetHDD.
4.
Set Type as NAS or IPSAN.
5.
Enter NetHDD IP address.
6.
Click
to search the available disks.
Figure 6-25 Add NetHDD
7.
Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
8.
Click OK.
Note
Up to 8 TB storage capacity is allowed for each network disk.
Result
The added network disks will be displayed in the storage device list.
Network Video Recorder User Manual
83
To Next Page
Loading...
Need help?
General
