HIKVISION DS-D2065LU-Y User Manual

Chapter 3 Installaon and Connecon
3.1 Installaon Noce
• The LCD display must be installed or moved by two or more persons.
• When moving the LCD display, ensure to grasp the grips at the rear and boom. Do not hold the
LCD screen as it may cause damage,
malfuncon or personal injury.
•
The LCD display should be mounted vercally relave to horizontal line.
• Mounng the LCD display on the wall requires special technologies, which must be done by
professionals. You should not aempt to mount the LCD display yourself. Our company is not
responsible for any accidents or personal injury caused by improper handling or mishandling.
• The LCD display should be used at room temperature from 0 °C to 40 °C. Leave enough space
around it for internal heat
dissipaon.
• Do not block the vents. It may cause a device excepon if the internal temperature of the LCD
display rises.
• Do not place the LCD display on a hot device.
• Please use the
mounng base and wall-mounng bracket which were specially designed for the
LCD display.
• Before installing, wipe the casing and the screen panel cleanly, otherwise it will aect the use of
the screen.
• Fix the screen but do not
ghten it too ghtly when installing the screen, otherwise the screen
may not work normally because of
deformaon.
• Improper handling during adjusng and using may result in equipment damage. The LCD display
can be used
connuously.
3.2
Operaon Noce
The LCD panel on the device is made by high-precision technology. However, ny spots on the
screen that are dim and dark may be observed, or when observed from side, the screen may be
colorful or the brightness may appear to be uneven. Yet the above phenomena are common
among LCD displays rather than faults and will not
aect the performance of the LCD display.
• The LCD display and its accessories in this manual are subject to change without prior noce.
• The LCD display should be used at room temperature from 0 °C to 40 °C.
• This LCD screen contains fragile materials, which can be damaged by dropping or impact, so
please take it lightly.
• Please do not let the screen display a
stac image for a long me, otherwise the "residual
image" will be
le on the screen to aect the normal use of the LCD display.
• It is strictly forbidden to scratch or tap the LCD display with hard objects. Do not switch on and
o frequently. Do not hit the device. The above acons may damage the device and accelerate
the aging of the device.
LCD Display User Manual
6

HIKVISION DS-D2065LU-Y Specifications

General

Brand	HIKVISION
Model	DS-D2065LU-Y
Category	Monitor
Language	English