LCD Monitor User Manual
18
OSD Settings Figure 4-6
Press MENU again to complete the settings and back to the main menu interface. Step 3
Configuring Screen Display 4.3.2
You can configure lighting modes to adopt different surrounding lighting conditions, the screen
saver mode when the monitor has no signal input, and the low energy mode.
On the main menu, press the directional keys on the remote control to select the Others Step 1
Setting.
Press OK to enter the other settings interface. Step 2
Press ◄ or ► to set the low energy, lighting and screen saver mode. Step 3
Lighting: Set the lighting parameters to adopt different surrounding lighting conditions.
Normal mode, Daylight1/Daylight2/Daylight3 (for daylight conditions) and
Night1/Night2/Night3 (for night light conditions) are configured.
The level 3 is more suitable for a surrounding lighting condition with higher backlight
compensation requirement.
No Signal: Set the screen saver mode to Blue or Black when there is no signal input.
Low Energy: Turn on/off the low energy mode. Enabling the low energy mode will reduce
the screen brightness to save the power of the device.
To Next Page
Loading...
Need help?
General