Conference Flat Panel User Manual
22
Figure 6-5 Add Other Network
3. Optional: Check Display Advanced Settings to select proxy and network IP type.
4. Tap Connect to connect the device to the added wireless network.
6.1.3 WLAN Hotspot Settings
When the device is connected to the wired network, it can provide wireless network for other
devices with WLAN hotspot enabled.
Steps
1. Go to Settings → Network → Hotspot.
2. Enable Portable WLAN Hotspot.
● Hotspot Isolation: After enabling hotspot isolation, even if the device is connected to the
LAN, it cannot access resources such as websites in the LAN.
3. Set parameters in the pop-up page.