Conference Flat Panel User Manual
28
Auto Switch When Connecting Signal Source
If this function is enabled, the system will switch to the newly-connected input source when
an external input source is connected.
Auto Switch When Disconnected from Signal Source
If this function is enabled, the system will switch to the configured input source as the device
is disconnected from the external input source.
Select Camera
Select the desired camera among those bound to the device.
Audio Input Device
Select the desired audio input device.
Audio Output Device
Select the desired audio output device.
Startup/Shutdown Settings
Startup Mode
Select Startup When Powered On or Standby When Powered On.
Scheduled Startup/Shutdown
Set the schedule for startup and shutdown.
No-signal Shutdown
Set the time for auto-shutdown if no signal is accessible.
Device Permission Settings
Disable Wi-Fi
If Wi-Fi is disabled, the device cannot be connected to the wireless network.
Disable Copying from USB Disk
If copying from USB disk is disabled, the device cannot read from external disks.
QR Code Sharing Settings
Share the content of whiteboard through a QR code.
Share in LAN Only
Devices in the same LAN as the flat panel can scan the QR code to download the content.
All Networks
Devices connected to all networks can scan the QR code to download the content.
Device Permission Settings
Wake from Serial Port
If this function is enabled, the device in standby status can be waken up by serial port
command.
To Next Page
Loading...
Need help?
General
