HIKVISION DS-K27 Series User Manual

Enable the funcon and you can open the door via bluetooth through App. You should add
the device to the App before use the funcon.
Authencaon Plan Conguraon
Set the authencaon schedule for the card reader.
Select an authencaon type and drag the me duraon on the me schedule table to draw
the authencaon duraon.
Click Clear and drag a me duraon to delete, or click → Clear All to delete all me
duraons.
Set Smart Parameters
Click Access Control → Conguraon → Smart → Smart .
Note
●
The funcons vary according to dierent models. Refers to the actual device for details.
●
Aer conguring the general parameters, all card readers will take eect.
Click Save to save the sengs aer the conguraon.
Fingerprint Recognion
The device support recognion ngerprint aer the funcon is enabled.
Fingerprint Security Level
Select the ngerprint security level.
The higher is the security level, the lower is the false acceptance rate (FAR).
9.4.4 Permission Management
You can set access permission schedule template, holiday schedule template, and set access
permission.
Congure
Schedule Template
Set Access Schedule Template
Access schedule templates are used to set authorized passing me for people. The device provides
three default access schedule templates: all-day template, workday template, and weekend
template. You can also add custom templates according to actual needs.
Steps
1.
Click Access Control → Permission Management → Access Plan Management → + Add.
DS-K27XX Series Access Controller User Manual
36

HIKVISION DS-K27 Series Specifications

General

Brand	HIKVISION
Model	DS-K27 Series
Category	IP Access Controllers
Language	English