HIKVISION DS-K27 Series User Manual

Steps
1.
Click System and Maintenance → System Conguraon → Network → Device Access → Hik-
Connect to enter the sengs page.
Note
Hik-Connect is an applicaon for mobile devices. With the App, you can view live image of the
device, receive alarm nocaon and so on.
2.
Check Enable to enable the funcon.
3.
Oponal: Check Custom, and you can set the server address by yourself.
4.
Enter the vericaon code.
5.
Oponal: View the register status. Click Refresh to refresh the status.
6.
Oponal: Click More to set the network connecon priority.
1) Enable WLAN or Wired Network according to your actual needs.
1) Hold and drag
to adjust the access priority.
7.
Click View to view device QR code. Scan the QR code to bind the account.
Note
8 to 32 leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are recommended to use a
combinaon of no less than 8 leers or numbers.
8.
Click Save to enable the sengs.
9.
Oponal: Click Refresh to refresh the binding status.
10.
Click Save.
9.7.10 Event
Sengs
Set the event linkage and the alarm output paramters.
Event Linkage
Set linked acons for events.
Steps
1.
Click System and Maintenance → System Conguraon → Event → Event Detecon → Linkage
Sengs to enter the page.
DS-K27XX Series Access Controller User Manual
59

HIKVISION DS-K27 Series Specifications

General

Brand	HIKVISION
Model	DS-K27 Series
Category	IP Access Controllers
Language	English