HIKVISION DS-K27 Series User Manual

Select mulple person, click Delete can delete person in batch.
Click Clear All to delete all person informaon.
Click or to switch the viewing method.
Enter the person's employee ID and select the
credenal status and click Filter to search. Click
Reset to reset all
condions.
Check Show Sub Organizaon, all persons in the sub organizaons will be displayed.
9.6 Device Management
9.6.1 Search Not Added Device
The system can automacally search for not added access modules that have been connected to
the access controller.
Click Device Management → Search Not Added Device. The searched not added access modules
will be displayed in the list of the page.
Click
in the acon bar to add an access module to the access controller.
9.6.2 Add Access Module
Add access module manually.
Before You Start
Make sure that the area has been added. For more details, see Area Management .
Steps
1.
Click Device Management to enter the
sengs page.
DS-K27XX Series Access Controller User Manual
50

HIKVISION DS-K27 Series Specifications

General

Brand	HIKVISION
Model	DS-K27 Series
Category	IP Access Controllers
Language	English