HIKVISION DS-K27 Series User Manual

Figure 9-11 Add Access Module
2.
Select the dial address of the access module, and set the DIP switch of the access module to be
consistent with the one shown in the picture.
Note
Aer adding or modifying the dialing address of the access module, you need to reboot the
access module to take it eect.
3.
Set the door parameters, and click Next.
Select Door of Access Module
According to the door actually controlled by the access module, select 1 or 2.
Door Name
Create the door name associated with the access module.
Area
Choose the area from the drop-down list. If you have not created an associated area in
advance, click Add Area to create.
Open
Duraon
Set the acon me aer the associated door is unlocked. If the door is not opened within the
set
me, the door will lock automacally. The range can be set from 1 to 255 s.
Door Magnec Sensor Type
DS-K27XX Series Access Controller User Manual
51

HIKVISION DS-K27 Series Specifications

General

Brand	HIKVISION
Model	DS-K27 Series
Category	IP Access Controllers
Language	English