HIKVISION DS-K27 Series User Manual

Figure 9-14 Event Linkage
2.
Click
3.
Set event source.
-
If you choose Linkage Type as Event Linkage, you need to select event types from the drop-
down list.
-
If you choose Linkage Type as Card Linkage, you need to enter the card No. and select the
card reader.
-
If you choose Linkage Type as Link Employee ID, you need to enter the employee ID and
select the card reader.
4.
Set linked acon.
Linked Access Controller Buzzing
Enable Linked Access Controller Buzzing and select Start Buzzing or Stop Buzzing for the
target event.
Card Reader Linkage
Enable Card Reader Linkage and click Add can check the card reader that will buzz. Click
Save.
Set the card reader's buzzing
acon.
Click to delete single card reader. Check the card readers and click Delete to delete in
batch. Click Batch
Congure to congure all card readers in the list.
Door Linkage
Enable Door Linkage and click Add can check the card reader that will buzz. Click Save.
DS-K27XX Series Access Controller User Manual
60

HIKVISION DS-K27 Series Specifications

General

Brand	HIKVISION
Model	DS-K27 Series
Category	IP Access Controllers
Language	English