HIKVISION DS-K2802 User Manual

Access Control Terminal·User Manual
80
1) In the Card Group Name field, input the name for the group as desired.
2) Click to set the effective time and expiry time of the card group.
3) Check the checkbox(es) to select the card(s) to add the card group.
4) Click OK to save the card group.
4. In the Set Authentication Group panel on the left, click Add to pop up the following dialog.
1) Select the access control point (door) of the device for multiple authentication.
2) Input the time interval for card swiping.
3) Select the template of the authentication group from the dropdown list. For details about
setting the template, refer to Chapter 7.6 Schedule and Template.
4) Select the authentication type of the authentication group from the dropdown list.
 Local Authentication: Authentication by the access control device.
 Local Authentication and Remotely Open Door: Authentication by the access control
device and by the client.
For Local Authentication and Remotely Open Door type, you can check the checkbox to
enable the super password authentication when the access control device is
disconnected with the client.
 Local Authentication and Super Password: Authentication by the access control device
and by the super password.
5) In the list on the left, the added card group will display. You can click the card group and
click to add the group to the authentication group.
You can click the added card group and click to remove it from the authentication
group.
You can also click or to set the card swiping order.
5) Input the Card Swiping Times for the selected card group.
Notes:

HIKVISION DS-K2802 Specifications

General

Product type	Access controller
Certification	CE, FCC
Compatibility	Wiegand
Mounting type	Wall
Product color	Black
Brand compatibility	Hikvision
Operating temperature (T-T)	-20 - 65 °C
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	285 mm
Width	237 mm
Height	69 mm