Video Intercom Door Station·User Manual
34
2) Press the # key to enter the network parameters settings interface.
Figure 7-8 Network Parameters Settings Interface
2. Edit network parameters.
1) Move the cursor to parameters to be configured.
2) Press the # key to enter or exit the editing mode.
3. Press the * key to exit the network configuration interface.
7.4.3 Changing Password
Purpose:
2 kinds of password are available when using the door station: configuration password
(admin password) and card activation password.
Configuration Password: It is necessary when you want to configure parameters of the
door station, such as IP parameters, door station No., system type, and so on.
Card Activation Password: It is necessary when you want to issue cards via password.
The default configuration password is 888999. We recommend you
reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your
product.
Press the numeric keys 4 and 6 to switch to the password settings interface.
To Next Page
Need help?
General
Weight and Dimensions
