HIKVISION DS-KD3003-E6 User Manual

3 Installaon
•
Make sure the device in the package is in good condion and all the assembly
parts are included.
•
The power supply the door staon support is 12 VDC. Please make sure your
power supply matches your door staon.
•
Make sure all the related equipment is power-o during the installaon.
•
Check the product specicaon for the installaon environment.
To install the door staon onto the wall, you are required to use a matched gang box.
Figure 3-1 Gang Box
Note
•
The dimension of gang box is: 407.5 (W) × 135 (H) × 55 (D) mm.
•
The dimensions above are for reference only. The actual size can be slightly
dierent from the theorecal dimension.
3.1.2 Flush Mounng with Gang Box
Steps
1.
Drill a hole in the wall for
inserng the gang box. The size of the hole should be
larger than that of the gang box. The suggested size of the hole is 408 (W) ×
135.5 (H) × 55 (D) mm.
Video Intercom D Series Door
Staon User Manual
14

HIKVISION DS-KD3003-E6 Specifications

General

Brand	HIKVISION
Model	DS-KD3003-E6
Category	Intercom System
Language	English