HIKVISION DS-KD3003-E6 User Manual

5 Local Operaon
5.1 Local Conguraon
5.1.1 Edit Network Parameters
Aer acvang, you should edit the network parameters.
Steps
1.
Hold * and # at the same me to enter the authencaon page.
2.
Authencate via administrator.
-
Authencate card to login.
-
Press # to enter the password to login.
3.
Swritch to Network sengs according to the ps on the page. Press # to enter
the sengs page.
4.
Edit the parameters according to your needs.
5.
Press * to save and exit.
5.1.2 Door Staon Sengs
Edit the parameters of the door staon (including but not limited to, community No.,
building No., oor No., room No. and device mode).
Steps
1.
Congure the parameters according to the actual needs.
Note
•
Outer door staon can only edit the Community No., Project No. and No.
•
The No. of the main door staon is 0.
•
The No. of sub door staons should be larger than 0 and ranges from 1 to 8.
•
Each unit should add 1 main door
staon. Up to 8 sub door staons can be
added to the main door staon.
2.
Oponal: Adjust the brightness of the screen.
3.
Oponal: Enable the Channel Mode according to your needs.
4.
Oponal: Select the language.
Video Intercom D Series Door
Staon User Manual
26

HIKVISION DS-KD3003-E6 Specifications

General

Brand	HIKVISION
Model	DS-KD3003-E6
Category	Intercom System
Language	English