HIKVISION DS-KD3003-E6 User Manual

Note
•
When the device is not acvated, the basic operaon and remote operaon
of device cannot be performed.
•
You can hold the Ctrl or Shi key to select mulple devices in the online
devices, and click the Acvate buon to acvate devices in batch.
4.3 Acvate Device via Web
You are required to acvate the device rst by seng a strong password for it before
you can use the device.
Default parameters of the door
staon are as follows:
•
Default IP Address: 192.0.0.65.
•
Default Port No.: 8000.
•
Default User Name: admin
Steps
1.
Power on the device, and connect the device to the network.
2.
Enter the IP address into the address bar of the web browser, and click Enter to
enter the
acvaon page.
Note
The computer and the device should belong to the same subnet.
3.
Create and enter a password into the password
eld.
4.
Conrm the password.
5.
Click OK to acvate the device.
Video Intercom D Series Door
Staon User Manual
25

HIKVISION DS-KD3003-E6 Specifications

General

Brand	HIKVISION
Model	DS-KD3003-E6
Category	Intercom System
Language	English