HIKVISION DS-KD8003-IME2 User Manual

2. Set the sub module address according to the DIP rules, and
install the rubber cover back.
Note
●
DIP 1, 2, 3, 4 are used to coding the sub module address. DIP
5, 6, 7, 8 are reserved.
●
Valid sub module address is from 1 to 8. The address should
be unique for connecng to the main unit.
The sub module address and its corresponding switch status
are displayed as below.
Sub
Modul
e
Addre
ss
DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 DIP 8
Modul
e 1
ON OFF OFF OFF OFF OFF OFF OFF
Modul
e 2
OFF ON OFF OFF OFF OFF OFF OFF
Modul
e 3
ON ON OFF OFF OFF OFF OFF OFF
Modul
e 4
OFF OFF ON OFF OFF OFF OFF OFF
Modul
e 5
ON OFF ON OFF OFF OFF OFF OFF
Modul
e 6
OFF ON ON OFF OFF OFF OFF OFF
Modul
e 7
ON ON ON OFF OFF OFF OFF OFF
Modul
e 8
OFF OFF OFF ON OFF OFF OFF OFF
4.2 Two-Module Installaon
4.2.1 Two-Module Surface Mounng
13

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920