HIKVISION DS-KD8003-IME2 User Manual

Note
You can edit the camera name only when Display Name is
enabled.
4. Select from the drop-down list to set the Time Format and
Date Format.
5. Click Save to enable the sengs.
Target Cropping
Steps
1. Click Image → Crop to enter the page.
2. Check Enable Target Cropping to enable the funcon.
3.
Click
to capture photo.
4.
Click to start recording.
5. Select Cropping Resoluon.
6. Click Save.
Note
●
You can select Cropping Resoluon as 704*576, 1280*720,
or 1920*1080.
●
You can zoom in or zoom out the image by selecng
Cropping Resoluon aer clicking Save.
7.3.7 Schedule Sengs
You can create call schedule, or else the device will call indoor
staon all day by default.
Steps
1. Click Schedule → Video Intercom → Call Schedule .
2. Click the next row below Enable Indoor
Staon All Day by
Default.
3. Enter Schedule Name.
4. Select Call Type.
5. Set Weekly Schedule.
1) Click Weekly Schedule.
Figure 7-16 Weekly Schedule
2) Drag mouse to set the schedule according to the actual
needs.
3)
Oponal: Click the copy icon to copy the schedule to other
days according to the actual needs.
4) Click Save.
67

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920