HIKVISION DS-KD8003-IME2 User Manual

3. Oponal: On the Live View page, control-click and select
Capture to get the picture of the live view.
7.3 Remote Conguraon
Click to set the parameters of the device.
Note
Run the browser, click → Internet Opons → Security to
disable the Protected Mode.
7.3.1 Device Management
You can manage the linked device on the page.
Click Device Management to enter the sengs page.
Figure 7-2 Device Management
Add Device
●
Click Add to add the indoor
staon or sub door staon. Enter
the parameters and click OK to add.
●
Click Import. Enter the
informaon of the device in the
template to import devices in batch.
Export
Click Export to export the informaon to the PC.
Delete
Select the device and click Delete to remove the selected device
from the list.
Refresh
Click Refresh to get the device informaon.
Oponal:
Set Device Informaon.
●
Click
to edit device informaon.
●
Click to delete device informaon from the list.
●
Select Status and Device Type to search devices.
7.3.2 Local Parameters
Sengs
You can congure the parameters of the live view, record les and
captured pictures. The record
les and captured pictures are the
ones you record and capture by using the web browser. You can
also set and view the saving paths of the captured pictures and
recorded videos on the PC that running the web browser.
57

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920