HIKVISION DS-KD8003-IME2 User Manual

Before You Start
Make sure the device to be added is in the same subnet with your
computer. Otherwise, please edit network parameters rst.
Steps
1. Click Online Device to select an
acve online device.
2. Click Add.
3. Enter corresponding
informaon, and click Add.
Figure 7-1 Add to the Client
7.1.2 Add Device by IP Address
Steps
1. Click +Add to pop up the adding devices dialog box.
2. Select IP/Domain as Adding Mode.
3. Enter corresponding informaon.
4. Click Add.
7.1.3 Add Device by IP Segment
You can add many devices at once whose IP addresses are among
the IP segment.
Steps
1. Click +Add to pop up the dialog box.
2. Select IP Segment as Adding Mode.
3. Enter corresponding
informaon, and click Add.
7.2 Live View via Door Staon
Steps
1. On the main page of the client
soware, click Main View to
enter the Live View page.
2. In the le list of the window, double-click the device IP or click
the play icon to live view.
56

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920