HIKVISION DS-KD8003-IME2 User Manual

Figure 6-14 Backlight
1) Check to enable BLC.
2) Select BLC Area.
6. Click Save to enable the
sengs.
OSD Sengs
You can customize the camera name, me/date format on the
live view.
Steps
1. Click Image → OSD to enter the
sengs page.
Figure 6-15 OSD
2. Check to enable Display Name, Display Date or Display Week
at your actual needs.
3. Edit the Camera Name.
Note
You can edit the camera name only when Display Name is
enabled.
4. Select from the drop-down list to set the Time Format and
Date Format.
5. Click Save to enable the sengs.
Target Cropping
Steps
1. Click Image → Crop to enter the page.
2. Check Enable Target Cropping to enable the funcon.
3.
Click
to capture photo.
4.
Click to start recording.
5. Select Cropping Resoluon.
6. Click Save.
46

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920