HIKVISION DS-KD8003-IME2 User Manual

Figure 7-7 Port Sengs
2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any
port No. which is not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any
port No. which is not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be
changed to any port No. ranges from 2000 to 65535.
3. Click Save to enable the
sengs.
SIP Seng
Steps
1. Click Network → Basic Sengs → SIP to enter the sengs
page.
Figure 7-8 SIP Sengs
2.
Check Enable VOIP Gateway.
3. Congure the SIP parameters.
4. Click Save to enable the sengs.
FTP Sengs
Steps
1. Click Network → Advanced → FTP to enter the
sengs page.
62

HIKVISION DS-KD8003-IME2 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Viewing angle, vertical	96 °
Maximum video resolution	1920 x 1080 pixels
Viewing angle, horizontal	180 °
Video codecs	H.264
Number of buttons	1 buttons
Streaming capability	Yes
Connectivity technology	Wired
Maximum number of cameras supported	-
Voice codecs	G.711u
Product color	Black, Grey
International Protection (IP) code	IP65
Operating relative humidity (H-H)	10 - 95 %
Door station operating temperature (T-T)	-40 - 60 °C
Indoor unit included	No
Outdoor unit power type	DC
Display diagonal	- \
Harmonized System (HS) code	85176920