HIKVISION DS-KD8102 User Manual

Video Intercom Door Station·User Manual
43
8 Remote Operation via Batch
Configuration Tool
You can configure and operate the video intercom devices via Batch Configuration Tool.
Default parameters of door station are as follows:
 Default IP Address: 192.0.0.65.
 Default Port No.: 8000.
 Default User Name: admin.
8.1 Activating Device Remotely
Purpose
You are required to activate the device first by setting a strong password for it before
you can use the device.
Activation via Batch Configuration Tool, and Activation via iVMS-4200 are supported.
Here take activation via Batch Configuration Tool as example to introduce the device
activation. Please refer to the user manual for the activation via iVMS-4200.
Steps:
1. Run the Batch Configuration Tool.
Figure 8-1 Selecting Inactive Device
2. Select an inactivated device and click the Activate button.
Figure 8-2 Activation

HIKVISION DS-KD8102 Specifications

General

Brand	HIKVISION
Model	DS-KD8102
Category	Intercom System
Language	English