HIKVISION DS-KD9203-FE6 User Manual

6
Conguraon via Client Soware
6.1 Edit Network Parameters
To operate and congure the device via LAN (Local Area Network), you need connect
the device in the same subnet with your PC. You can edit network parameters via
iVMS-4200 client soware.
Steps
1.
Select an online acvated device and click the Modif
y Nenfo.
2.
E
dit the device IP address and gateway address to the same subnet with your
computer.
3.
Enter the password and click OK to save the network parameters modicaon.
Note
•
The de
fault port No. is 8000.
•
The default IP address of the door staon is 192.0.0.65.
•
Aer
eding the network parameters of device, you should add the devices
to the device list again.
6.2 Add Device
You should add device to the soware so as to congure the device remotely.
6.2.1 Add Online Device
Before You Start
Mak
e sure the device to be added is in the same subnet with your computer.
Otherwise, please edit network parameters rst.
Steps
1.
Click Online Device to select an acve online device.
2.
Click Add.
3.
En
ter corresponding informaon, and click Add.
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
15

HIKVISION DS-KD9203-FE6 Specifications

General

Megapixel	2 MP
Maximum frame rate	30 fps
Supported video modes	720p, 1080p
Field of view (FOV) angle	120 °
Product color	Black
Housing material	Glass, Plastic
International Protection (IP) code	IP65
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Supported network protocols	ISAPI, RTSP, SNMPv1, v2, v3
Voice codecs	G.711a, G.711u
Number of speakers	1
Connectivity technology	Wired
Number of displays supported	-
Power consumption (typical)	13 W
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Package weight	2166 g
Display diagonal	4.3 \
Display technology	LCD

Weight and Dimensions

Depth	124 mm
Width	373 mm
Height	43.7 mm
Weight	1050 g