If the added device has been congured with person informaon (including person
de
tails, ngerprint, issued card informaon), you can get the person informaon
from the device and import to the client for further operaon.
Steps
Note
This funcon is only supported by the device the connecon mothod of which is
T
CP/IP when adding the device.
1.
In the organizaon list on the le, click to select an organizaon to import the
per
sons.
2.
Click Get from Device to pop up the dialog box.
3.
The added device will be displayed.
4.
Click to select the device and then click Get to start geng the person
informaon from the device.
Note
•
The person informaon, including person details, person's ngerprint
in
formaon (if congured), and the linked card (if congured), will be
imported to the selected organizaon.
•
If the per
son name stored in the device is empty, the person name will be
lled with the issued card No. aer
imporng to the client.
•
The gender of the persons will be Male by default.
6.6.5 Change Person to Other Organizaon
You can move the person to another organizaon if needed.
St
eps
1.
Select the person in the list and click Change Organizaon.
2.
Select the
organizaon to move the person to.
3.
Click OK to save the
sengs.
6.6.6 Add Person in Batch
Enter a short
descripon of your task here (oponal).
Before You Start
Enter the prerequisites here (oponal).
Video Intercom Face Recognion Door Staon with 4.3-inch Screen User Manual
37
To Next Page
Loading...
Need help?
General
Weight and Dimensions
