HIKVISION DS-KH7300EY Series User Manual

Chapter 4 Set Device Rotary DIP Switch
Aer door staons have been connected to indoor staons, you can set rotary DIP switch of these
devices.
DIP Switch of Door Staon
Use the rotary switch to set the building No., door staon No., sub door staon, outer door staon
No. and door open duraon. The Tens column refers to the number in Tens, and the Units column
refers to the number in Units. On each rotary DIP switch, 0 to 9 refers to No. 0 to 9. In total, you
can use 1 to 99 to number the building. If the door
staon is main door staon, the Door Staon
No. should be set as 0; If it is sub door staon, set Door Staon No. as 1~16; If it is outer door
staon, set Door Staon No. as 90~99. Use the screwdriver to adjust the number. The arrow
indicates the number.
Building No. (1~99)
Figure 4-1 Building No.
Door Staon No.
Main Door
Staon: 0
Sub Door Staon: 1~16
Outer Door
Staon : 90~99
Figure 4-2 DIP Switch of Door
Staon No.
Door Open Duraon
Figure 4-3 DIP Switch of Door Open
Duraon
DS-KH7300EY Series Indoor Staon User Manual
8

HIKVISION DS-KH7300EY Series Specifications

General

Brand	HIKVISION
Model	DS-KH7300EY Series
Category	Intercom System
Language	English