HIKVISION DS-KH9510-WTE1 User Manual

DS-KH9510-WTE1 Video Intercom Indoor Station User Manual
UM DS-KH9510-WTE1 Video Intercom 031821NA 15
3 Remote Operation via Mobile Client
Set up Mobile Client
You can configure and operate the device via mobile client remotely.
Before You Start
Make sure your mobile device is connected to Wi-Fi.
Steps
1. Install Hik-Connect and register a user account for iOS or Android.
1) Search for “Hik-Connect” in the iOS App Store
TM
or use the following QR code to download and
install the mobile client.
Figure 9, Hik-Connect Link
2) Launch the mobile client and follow the on-screen instructions to register a user account.
2. Start the mobile client, and log in to the mobile client.
Set Up Device via Mobile Client
To operate the indoor station normally, add the device to the client.
Steps
1. On the client home page, tap Add Device.
2. Scan QR code of the device to add.
The QR code is printed on the label on the rear panel of doorbell. If you have already
installed the device, you can scan the QR code on the cloud service page in the device.
Tap to enable the flashlight if the scanning environment is too dark.
If there are device QR codes in photo album of the phone, tap to extract QR code
from local album.

HIKVISION DS-KH9510-WTE1 Specifications

General

Product type	Master station
Product color	White
Display resolution	1024 x 600 pixels
Brand compatibility	Hikvision
Quantity per pack	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C

Weight and Dimensions

Depth	166 mm
Width	254 mm
Height	26.65 mm