DS-MCW405/32G/GPS/WIFI Body Camera User Manual
UM DS-MCW405/32G/GPS/WIFI 042021NA 16
3. Click Save.
NOTE: If positioning failed, take the device to an open place to ensure the device can receive
the positioning signal.
Positioning function varies by model. The actual device prevails.
3.5.2 Upload Positioning Information
After positioning is enabled, if the device has been connected to the platform, the positioning information
can be uploaded to the platform according to the set interval.
Before you start
Connect the device to platform. Refer to
Connect to Platform
for details.
1. Go to Device Configuration > Extended Settings.
2. Set GPS Upload Interval.
3. Click Save.
NOTE: Positioning function varies by model. The actual device prevails.
3.5.3 Overlay Positioning Information
After positioning is enabled, the positioning information can be overlaid on video.
1. Go to Device Configuration > Extended Settings.
2. Check GPS Overlay.
3. Click Save.
Result
During record and playback, the positioning information can be overlaid on video.
NOTE: Positioning function varies by model. The actual device prevails.
3.5.4 Set IR
When the record environment is dim or dark, you can enable IR light to activate a supplemental light.
NOTE: If you turn LED light on while the IR function is enabled, the IR function will be forcibly
disabled. After you turn off the LED light, the IR function will restore to enabled.
1. Go to Device Configuration > System Settings.
2. Select Infrared Settings.
•
Close: IR function is disabled.
•
Open: When record starts, IR is enabled. Otherwise, IR is disabled.
•
Auto: IR switches between daylight and night working modes automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
