Body Camera User Manual
26
Chapter 6 System Configuration
Go to Main Menu > System to configure parameters such as system volume, voice prompt, LED,
auto-lock, IR light, etc.
6.1 Set System Sound
Purpose
Turn on and turn off system sound. If it is on, when you press a button or alarm occurs, body
camera will send out a sound. It is on by default.
Step 1 Go to Main Menu > System.
Step 2 Tap / to position the cursor on System Volume. And tap to enter the menu.
Step 3 Tap / to select On or Off.
Step 4 Tap to save the settings.
6.2 Set Voice Prompt
Purpose
You can enable or disable voide prompt when you record or tape.
Step 1 Go to Main Menu > System.
Step 2 Tap / to position the cursor on Voice Prompt. And tap to enter the menu.
Step 3 Tap / to select On or Off.
Step 4 Tap to save the settings.
6.3 Turn on/off LED
Purpose
You can turn on or turn off the LEDs. If LEDs are on, they will be automatically turned on or off
according to the device status.
Step 1 Go to Main Menu > System.
Step 2 Tap / to position the cursor on LED. And tap to enter the menu.
Step 3 Tap / to select LED as On or Off.
Step 4 Tap to save the settings.
To Next Page
Loading...
Need help?
General
