114
Chapter 5 General Operations
5.1 Arming
You can use keypad, keyfob, Tag, client software, mobile client to arm your system.
After the arming command is sending to AX PRO, the system will check the detector status. If the
detector is in fault, you will need to choose whether to arm the system with fault.
While the system is armed, the AX PRO will prompt the result in 5s, and upload the arming report.
Access level of Arming
The user in level 2 or 3 has the permission to arm or partly arm the system.
Arming Indication
The arming/disarming indicator keeps solid blue for 5s.
Reason of Arming Failure
● Intrusion detector triggered (excepts the detector on the exit route).
● Panic alarm device triggered.
● Tampering alarm occurred.
● Communication exception
● Main power supply exception
To Next Page
Loading...
Need help?
General
