HIKVISION DS-PS1-I-WB User Manual

39
4. Tap Maintenance → Reboot Device.
The AX PRO will reboot.
5. Tap →Maintenance → Device Upgrade to enter the upgrade page.
The AX PRO will upgrade to the latest version.
4.1.2 Use the Hik-ProConnect Portal
For AX PRO security control panel, you can perform operations including arming/disarming area,
silence alarm, bypassing zone etc., and remotely configure the control panel on the Portal. You can
also apply for PIN (required for upgrading the firmware of AX PRO) and switch the language of AX
PRO.
Click Site to enter the site list page, and then click the name of a site to enter site details page.
Remotely Operate AX PRO
Click the AX PRO to open the operation panel. And you can perform the following operations.
Table 4-3 Operation Description
Operation
Description
Stay Arm a Specific Area
Select the Area tab, and then click Stay Arming to stay arm the
area.
Away Arm a Specific Area
Select the Area tab and then click Away Arming.
Disarm a Specific Area
Select the Area tab and then click Disarm.
Stay Arm Multiple Areas
Select the Area tab, and then select areas and click .
Away Arm Multiple Areas
Select the Area tab, and then select areas and click .
Disarm Multiple Areas
Select the Area tab, and then select areas and click .
Silence Alarms of Multiple
Areas
Select the Area tab, and then select areas and click
Filter Peripheral Device by
Area
Select the Device tab, and then click and select an area to
only display the peripheral devices linked to the selected area, or
select All to display all the peripheral devices linked to all the
areas.
Control Relay
Select the Device tab, and then select a wireless output expander
to display the sirens linked to it, and then select siren(s) to
enable/disable them.
Bypass Zone
Select the Device tab, and then select a zone (i.e., detector) and
turn on the Bypass switch to bypass the zone.

HIKVISION DS-PS1-I-WB Specifications

General

Brand	HIKVISION
Model	DS-PS1-I-WB
Category	Security System
Language	English