HIKVISION E Series User Manual

User Manual of E Series Network Mini PTZ camera
© Hikvision
102
Figure 6-52 Modify an IP
(3) Click the OK to finish modifying.
 Delete an IP Address
Left-click an IP address from filter list and click Delete.
 Delete all IP Addresses
Click Clear to delete all the IP addresses.
5. Click Save to save the settings.
Configure Security Service Settings
Steps:
1. Enter the Security Service interface:
Configuration> System > Security > Security Service
2. Check the checkbox to enable the SSH function.
Enable SSH: Enabling SSH (Secure Shell) function is to encrypt and compress the data and to
reduce the transmission time.
3. Check the checkbox to enable the Illegal Login Lock function.
4. Illegal Login Lock: Enabling illegal login lock function is to automatically lock the device IP
after the admin user performing 7 failed password attempts (5 attempts for the
user/operator).
5. Click to save the settings.
6.4.4 User Management
Enter the User Management interface:
Configuration > System > User Management
The admin user has access to create, modify or delete other accounts. Up to 32 user accounts can
be created.

HIKVISION E Series Specifications

General

Brand	HIKVISION
Model	E Series
Category	Security Camera
Language	English