HIKVISION E Series User Manual

User Manual of E Series Network Mini PTZ camera
© Hikvision
34
Chapter 5 System Configuration
5.1 Storage Settings
Before you start:
To configure record settings, please make sure that you have the network storage device within
the network or the Micro SD card inserted in your mini PTZ camera.
5.1.1 Configuring Recording Schedule
Purpose:
There are two kinds of recording for the mini PTZ cameras: manual recording and scheduled
recording. For the manual recording, refer to Section 4.4 Recording and Capturing Pictures
Manually. In this section, you can follow the instructions to configure the scheduled recording.
By default, the record files of scheduled recording are stored in the SD card (if supported) or in
the network disk.
Steps:
1. Enter the Record Schedule Settings interface:
Configuration > Storage > Schedule Settings > Record Schedule
Figure 5-1 Recording Schedule Interface
2. Check the checkbox of Enable to enable scheduled recording.
3. To set the advanced settings of the mini PTZ camera, click to enter the
advanced settings interface.

HIKVISION E Series Specifications

General

Brand	HIKVISION
Model	E Series
Category	Security Camera
Language	English