To Next Page

To Previous Page

User Manual of E Series Network Mini PTZ camera

 Click to select from and display live video with the main/ sub

stream. The main stream is with a relatively high resolution and needs much

bandwidth. The default setting of stream type is .

 Click to select between and play the live video via player

Webcomponents or Quick Time. The live video is played via webcomponents by

default, and other types of players are supported for the browser, such as MJPEG,

and VLC. You are required to download and install the player to play the live video.

 Click and it displays . Click to enable two-way audio and the icon

turns into . Click the icon again to stop two-way audio.

 Click to start live view and the icon turns into . Click the icon again to stop

live view.

 Click to capture the picture.

 Click to start recording and the icon turns into . Click the icon again to

stop recording.

 Click to enable digital zoom function and the icon turns into . Then

click-and-drag the mouse towards low right direction to draw a rectangle on the

image as the desired zoom. After viewing it you can click any place of the picture

to get back to normal picture.

 Click the on the toolbar to enter the regional exposure operation mode and

the icon turns into . Then click-and-drag the mouse to draw a rectangle on the

image as the desired exposure region.

 Click the on the toolbar to enter the regional focus operation mode and the

icon turns into . Then click-and-drag the mouse to draw a rectangle on the

image as the desired focus region.

 Click to display the . Drag the slider to adjust the

volumn.

Before using the two-way audio or recording with audio functions, please set the Stream

Type to Video & Audio referring to Section 6.2.1 Configuring Video Settings.

Please refer to the following sections for more information:

 Configuring remote recording in Section 5.1.1 Configuring Recording Schedule.

 Setting the image quality of the live video in Section 6.3 Configuring Image Settings and

Section 6.2.1 Configuring Video Settings.

 Setting the OSD text on live video in Section 6.3.2 Configuring OSD Settings.

HIKVISION E Series User Manual

Other manuals for HIKVISION E Series