HIKVISION HWN Series User Manual

Network Video Recorder User Manual
27
Sort Channel Order
Channel layout windows are ordered by channel number. You can change the camera linked
channel number by dragging windows.
Steps
1. Go to Configuration → Camera → Camera.
2. Click Sort Channel.
3. Drag a channel window to the channel number as your desire.
4. Click Apply.
Note
After sorting channels, the device will reconnect to network cameras.
Upgrade Network Camera
The Network camera can be remotely upgraded through the device.
Before You Start
● Ensure you have inserted the USB flash drive to the device, and it contains the network camera
upgrade firmware.
● Ensure your network camera is on the same network segment with your video recorder.
● Ensure the network connection is valid and correct.
Steps
1. Go to Configuration → Camera → IP Camera.
2. Click .
3. Click Yes to confirm.
4. Select the camera upgrade firmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automatically after upgrade
completed.
Configure Advanced Camera Parameters
You can configure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
● Ensure your network camera is on the same network segment with your video recorder.
● Ensure the network connection is valid and correct.
Steps
1. Go to Configuration → Camera → IP Camera.
2. Click .
3. Set camera parameters like IP address, camera password, etc.
4. Click Apply.

HIKVISION HWN Series Specifications

General

Brand	HIKVISION
Model	HWN Series
Category	Network Hardware
Language	English