User Manual of Network Traffic Camera
24
Chapter 8 System Configuration
Purpose:
You can configure the parameters on this page, including device information, serial
ports, network parameters, time configuration, service, etc.
8.1 Viewing Device Information
Go to the device information page to check the device information: Configuration >
Device Configuration > System Configuration > Device Information.
Device Name and Device No. can be changed as desired.
Other information of the camera, such as Model, Serial No., Firmware Version,
Encoding Version, Hardware Version, Number of Channels, Number of Trigger Input,
and Number of Trigger Output are displayed for your reference. And the information
cannot be edited in this menu.
Figure 8-1 Device Information
8.2 Configuring Installation Parameters
You can set the installation parameters of the camera. These parameters are designed
To Next Page
Loading...
Need help?
General
Weight and Dimensions
