EasyManuals Logo
Home>HIKVISION>Security Camera>iDS-TCM203-A

HIKVISION iDS-TCM203-A User Manual

HIKVISION iDS-TCM203-A
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
User Manual of Network Traffic Camera revise
35
Max. Bitrate: Set the max. bitrate to 32 to 16384 Kbps, or custom. The higher
value corresponds to the higher video quality, and the higher bandwidth is
required.
Note: The maximum limit of the max. bitrate value varies according to different
cameras. For some certain cameras, the maximum limit is 8192 Kbps or 12288
Kbps.
Frame Rate: The range of frame rate varies according to different video standard.
Under NTSC standard, the max. rate can be set to 60 fps. Under PAL standard, the
max. rate can be set to 50 fps. The frame rate is to describe the frequency at which
the video stream is updated and it is measured by frames per second (fps). A
higher frame rate is advantageous when there is movement in the video stream, as
it maintains image quality throughout.
Resolution: Select the resolution of the video output.
SVC: Scalable Video Coding is an extension of the H.264/AVC standard. Select
on/off to enable/disable the SVC function.
3. Configure the sub-stream parameters. Sub-stream can be used for live view when
the bandwidth is limited.
4. (Optional) Click Advanced Settings to expand the menu and configure the
following parameters.
Bitrate Type: Select the bitrate type to Constant or Variable.
Video Quality: When bitrate type is selected as Variable, 6 levels of video quality
are selectable.
Encoding Complexity: Select the encoding complexity. The higher the complexity
is, the better the image quality is.
I Frame Interval: Set the I-Frame interval to 1 to 400.
Video Encoding: Select the encoding mode to H.264, MJPEG, or H.265.
5. Click Save to save the settings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-TCM203-A and is the answer not in the manual?

HIKVISION iDS-TCM203-A Specifications

General IconGeneral
Form factorBullet
Mounting typeCeiling/wall
Product colorGray
Protection featuresWater resistant
International Protection (IP) codeIP66
TypeIP security camera
CertificationCE, FCC
Placement supportedOutdoor
Connectivity technologyWired
Maximum operating distance50 m
Number of lenses1
Focal length range8 - 32 mm
Maximum aperture number1.4
Video streamingYes
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264, H.265, M-JPEG
Wi-FiNo
Ethernet interface typeGigabit Ethernet
Supported network protocolsTCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size128 GB
RS-485 ports2
Sensor typeCMOS
Optical sensor size1/1.8 \
LED typeIR
Infra-red wavelength850 nm
Number of illumination LEDs3
Minimum illumination- lx
Field of view (FOV) angle42.5 °
Audio input channels2 channels
Sustainability certificatesRoHS
Operating temperature (T-T)-30 - 70 °C
Operating relative humidity (H-H)5 - 95 %
DC output voltage24
Power source typeDC
Power consumption (max)15 W
Weight and Dimensions IconWeight and Dimensions
Depth428.5 mm
Width120 mm
Height132.8 mm
Weight3120 g

Related product manuals